Bends, branches, contraction, expansion etc. associated with ducting system results in pressure drop of the…
The conversion of Head to Pressure or vice versa is calculated using following formula in…
Two slurries having density of 1.26 t/m3 and 1.6 t/m3 are mix to make 300…
Flow of air is caused by a pressure differential between two points. Flow will originate…
Latest From Blogs
-
-
In most average plant situations, the Process design will require that a specific rate of…
-
Bends, branches, contraction, expansion etc. associated with ducting system results in pressure drop of the…
-
The Bogue equations widely used in cement quality control are mathematically based estimates of the…
-
LSF (Lime Saturation Factor) is the theoretical point in the C-S-A-F system where there is…
-
Clinker liter weight on lower side means low burning, low strength in clinker and expansion…
-
Flow of air is caused by a pressure differential between two points. Flow will originate…
-
Cooling rate as described in different cement books and guidelines for better quality of clinker…
-
The specific heat is the amount of heat per unit mass required to raise the…
-
Cement soundness due to free lime can be checked by cement paste expansion in boiling…